 |
Automated wire and flat metal pay off systems are a substantial part in today's automated and economic wire and flat metal production.
The tendency to reduce cost per part by using bigger wire and flat metal packages requires automated pay off systems that are capable to stop production (including turn off of production unit) when detecting defective material.
The construction has to be based on material requirements and must prevent additional twisting and bending of materials before entering production units.
Construction is based on the following factors:
- Ability to run wire and flat metal material
- Continuously variable speed
- Emergency stop connected to the production unit. The detection of defective material or erratic production stops the production unit.
- Timer
- "Dancer-Timer" for machine shut off at material end (Standard: PH-C2)
- Interference alert (Light and Sound)
- Straight material feed towards production unit. Turn direction: Right and left.
- Separate control unit for PH-C2 enables control next to the production unit.
| Modell |
PH-B1 |
PH-B2 |
PH-B3 |
PH-C2 |
| Max. load |
60 kgs |
100 kgs |
200 kgs |
500 kgs |
| Table size |
600mm |
800mm |
900mm |
1.000mm |
| Reel size |
150-550mm |
150-550mm |
240-760mm |
270-810mm |
| Power |
90W |
100W |
250W |
370W |
| Max. speed |
75 RPM |
75 RPM |
60 RPM |
60 RPM |
| Weight |
65kgs |
85kgs |
200kgs |
250kgs |
| Dimensions |
90 x 70 x 120cm |
125 x 90 x 130cm |
160 x 110 x 60cm |
180 x 120 x 60cm |
| Download Prospekt as PDF File |
 |
|
